
The General Chemical State Laboratory is the first producer of certified reference materials in Greece to be accredited by the Hellenic Accreditation System (ESYD) in accordance with the international standard ISO 17034. The CRMs produced and certified by the Chemical Metrology Service provide every chemical laboratory with a basis for valid physicochemical measurements, traceable to the International System of Units (SI). The procedures followed allow for the certification of reference materials either through accurate measurements by primary methods that are directly traceable to the SI via CMCs registered in the KCDB, or by interlaboratory testing carried out by experienced accredited laboratories coupled to calibration procedures that ensure traceability to the SI. These include: a) primary organic calibrators and solutions thereof, mainly intedend for the calibration of analytical instruments; and b) matrix materials, which serve as a starting point for the validation of analytical methods, as well as for monitoring their reliability (quality control).
The certified reference materials available are presented in the following table:
primary organic calibrators | chemical purity | value expressed as a fraction |
HRM POC 01 | dibenzo[b,d]thiophene | 999.9 ± 2.3 mg/g |
HRM POC 02 | 1,3,5-tri-tert-butylbenzene | 993.9 ± 1.7 mg/g |
HRM POC 03 | 1,3,5-triisopropylbenzene | 978.6 ± 3.4 mg/g |
HRM POC 04 | n-butoxybenzene | 999.8 ± 2.1 mg/g |
solutions of primary organic calibrators | organic calibrator | value expressed as a fraction |
HRM 34 01 | ethanol | 10.00 ± 0.01 (% v/v, 20 °C) |
HRM OCS.001 | trans-zearalenone | 15.026 ± 0.322 mg/kg |
HRM OCS.002 | aflatoxin B1 | 10.052 ± 0.287 mg/kg |
HRM OCS.003 | patulin | 10.00 ± 0.31 mg/kg |
HRM OCS.004
| dimethyl phthalate diethyl phthalate di(n-butyl) phthalate benzyl butyl phthalate bis (2-ethyl hexyl) phthalate di(n-octyl) phthalate bis(2-ethylhexyl) terephthalate | 2.029 ± 0.024 mg/mL 2.003 ± 0.030 mg/mL 2.080 ± 0.019 mg/mL 2.010 ± 0.025 mg/mL 2.043 ± 0.029 mg/mL 2.037 ± 0.022 mg/mL 2.148 ± 0.021 mg/mL |
matrix materials | parameters | value expressed as a fraction |
HRM 34 05 S10 (diesel) | sulfur | 9.86 ± 0.94 mg/kg |
HRM 34 05 S15 (diesel) | sulfur | 15.39 ± 1.03 mg/kg |
HRM 34 05 S1000 (gasoil) | sulfur | 991 ± 23 mg/kg |
EXHM MARKER 24 Sample 7 (diesel) | 1,3,5-triisopropylbenzene, n-butoxybenzene | 1.749 ± 0.076 mg/kg 1.300 ± 0.060 mg/kg |
EXHM MARKER 24 Sample 10 (gasoil) | 1,3,5-triisopropylbenzene n-butoxybenzene | 11.619 ± 0.590 mg/kg 10.859 ± 0.475 mg/kg |
EXHM MARKER 24 Sample 14 (diesel) | 1,3,5-tri-tert-butylbenzene n-butoxybenzene | 0.325 ± 0.011 mg/kg 1.580 ± 0.009 mg/kg |
EXHM MARKER 24 Sample 18 (gasoil) | 1,3,5-tri-tert-butylbenzene n-butoxybenzene | 2.242 ± 0.049 mg/kg 11.314 ± 0.270 mg/kg |
Details about their packaging and pricing are presented at this link.
SURPLUS PT ITEMS
At the same time, surplus PT items from the proficiency testing rounds offered by the Chemical Metrology Service are available as quality control materials. These materials are provided at the standard cost of 80 € (ex. postage) and are accompanied by a specification sheet with property values and respective validity ranges assigned from the respective comparisons.
For information about the available surplus PT items, please contact us at schema@gcsl.gr.
